Users Guide

Table 8. : LAN User Configuration
Parameter Description Value
Provisioning Server Address
Criteria
Enter provision server address. IPV4 or IPV6 or Host Name
Auto-Discovery Discovers the provisioning server. Enable or Disable
Account Access Disabling account access deactivates all
other fields on the LAN User Configuration.
NOTE: The option is available only for
the ’root’ user.
Enable or Disable
Account Username Enables the modification of an iDRAC
username.
Maximum of 16 printable ASCII
characters
Password Enables an administrator to specify or edit
the iDRAC user's password (encrypted).
Maximum of 20 characters
Confirm Password Re-enter the iDRAC user's password to
confirm.
Maximum of 20 characters
Account Privilege
Assigns the user's maximum privilege on
the IPMI LAN channel to the user groups.
Admin, Operator, User, or No
Access
Smart Card Authentication
Smart Card Authentication for iDRAC log in.
If enabled, a Smart Card must be installed to
access the iDRAC.
Enable, Disable, or Enable with
RACADM
Provisioning Server Address Criteria
• A list of IP addresses and/or host names and ports separated by comma.
• Host name can be fully qualified.
• IPv4 address – starts with ‘(‘ and ends with ‘)’ when specified at the same time with a host name.
• Each IP address or host name can be optionally followed by a ‘:’ and a port number.
• Example of valid strings are - hostname, hostname.domain.com
Account Privilege
Table 9. : Account Privilege
Privileges Admin Operator User No Access
Login to iDRAC Yes Yes Yes -
Configure iDRAC Yes Yes - -
Configure Users Yes - - -
Clear Logs Yes - - -
Execute Server Control Commands Yes Yes - -
Access Console Redirection Yes Yes - -
Access Virtual Media Yes Yes - -
Test Alerts Yes Yes - -
Execute Diagnostic Commands Yes Yes - -
41