Users Guide

Attribute Description Values

communicating with the nearest router or hub. When auto-negotiate

is off, you must set the Duplex Mode and Network Speed values

manually.

LAN Speed Configures the network speed to match the user's network

environment. This option is not available if Auto-Negotiate is set to

On.

10 Mb, 100 Mb, and 1000

LAN Duplex Configures the duplex mode to match the user's network

environment. This option is not available if Auto- Negotiate is set to

On.

Full or Half

Common IP Configuration

To set common IP configuration:

1. From iDRAC Configuration, go to IP Configuration.

2. Register the iDRAC name.

3. Set the domain name from DHCP.

4. Specify the domain name.

5. Specify the host name string.

6. Click OK to save your settings and return to the iDRAC Configuration menu.

The information set during the configuration is erased if iDRAC is reset to the original defaults or if the iDRAC

firmware is updated.

Table 4. : Common IP Configuration Attributes

Attribute Description Values

(DNS)

Yes or No

iDRAC Name View or edit the iDRAC name used for registering the DNS.

The name string can contain up to 63 printable ASCII

characters.

NOTE: You cannot edit the name string when Register

iDRAC Name is set to No.

Enable or Disable

Domain Name from DHCP iDRAC acquires the domain name from the Dynamic Host

Configuration Protocol (DHCP) server.

If set to No, you must enter the domain name manually.

Yes or No

Domain Name View or edit the iDRAC domain name used if it is not

acquired from DHCP.

You can specify a domain name when Domain Name from

DHCP is set to No.

Enable or Disable

Host Name String Specify or edit the host name associated with iDRAC.

The Host Name string can contain up to 62 ASCII printable

characters.

IPv4 Configuration

To set IPv4 configuration: