Release Notes

Issue 14
Description
When Enterprise or Enterprise Evaluation license expires, Active Directory is disabled automatically.
Resolution
After re-installing the Enterprise or Enterprise Evaluation license, administrative user can log in as an existing local iDRAC7
user to re-enable Active Directory authentication, through available interfaces such as RACADM or iDRAC7 Web interface.
Remote RACADM can be used in script to batch-enable Active Directory. If a local iDRAC7 user is not enabled or not
configured for direct remote access, the administrative user must use local RACADM or OpenManage Server Administrator to
configure a local user.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC7.
Issue 15
Description
When a power reset is performed, the Virtual Console Viewer menu options (except File > Exit and Help options) are
grayed-out or inaccessible. The ' Link interrupted ' message appears at the bottom of Virtual Console Viewer.
Resolution
Due to a temporary network outage, the Virtual Console Viewer menu options are not accessible. The ‘ Link interrupted ’
message is displayed to indicate that an outage has occurred. This is a temporary problem and the menu options are
available when the network is restored.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC7.
Issue 16
Description
The Front Panel page in the iDRAC7 Web interface and the physical LCD on the server front panel may display IPv6 address
as undefined even if IPv6 was enabled.
Resolution
Perform one of the following to view the IPv6 address:
 Wait for the IPV6 DHCP6 server to respond and display the IPv6 address.
or
 In the iDRAC7 Web interface, go to Overview > iDRAC Settings > Properties . Under the Current IPv6 Settings
section, see Link Local Address, which is the IPv6 address.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC7.