Users Guide

• Whether Auto-discovery runs immediately or after the next AC power cycle. This is a required input.

• Provisioning Server IP address or host name. This is optional.

For example, you must reinitiate Auto-discovery to move the managed system from one data center to another. The

auto-discovery settings are persisted along with the credentials used for discovery. When the system is turned on in the

new data center, Auto-discovery runs according to the factory default settings, and creates the new iDRAC user

credentials for the new data center.

NOTE: iDRAC administrator or iDRAC user with Execute Server Command privilege is required to run WS-

Management commands.

The following operations are performed by default while reinitiating Auto-discovery:

• Enable NIC (Blade servers)

• Enable IPv4

• DHCP enable

• Deletes all administrator accounts except User ID 2, which is the default ’root’ administrator account.

• Disable Active Directory

• Get DNS server address from DHCP

• Get DNS domain name from DHCP