User's Manual

1. Click the Start button and select Settings® Control Panel® System® System Properties.

2. Click the Advanced tab.

3. Click the Startup and Recovery... button.

4. Deselect the Automatically Reboot check box.
Installing the Software on the Management Station
Install the software on the management station, including Server Administrator, using the Systems Management CD.
For instructions about installing Server Administrator software, see your Server Administrator User's Guide.

Installing the racadm CLI on a Red Hat®Enterprise Linux Management Station
You can install the racadm CLI on a management station running Red Hat Enterprise Linux so that the remote racadm functions can be used.
To install the racadm CLI utility, insert the Systems Management CD in the management station's CD drive and type the following commands from a command
prompt:
mount /mnt/cdrom
cd /mnt/cdrom/rac4/linux
rpm -ivh racadm-4.0-0.i386.rpm
For help with the racadm command, type the man racadm or racadm help command after issuing the previous commands. For more information about the
racadm CLI, see "Using the serial and racadm Commands."

Uninstalling the racadm CLI on a Red Hat Enterprise Linux Management Station
You can uninstall the racadm CLI by issuing the following command from a command prompt:
- rpm -e racadm
Configuring a Supported Web Browser
The following sections provide instructions for configuring the supported Web browsers. For a list of supported Web browsers, see "Supported Web
Browsers."

Configuring Internet Explorer to Connect to the Web-Based Interface
If you are connecting to the DRAC 4 Web-based interface from a management station that connects to the Internet through a proxy server, you need to
configure the Web browser to connect properly.

1. From the Internet Explorer main window, click Tools, and then click Internet Options.

2. From the Internet Options window, click the Connections tab.

3. Under Local Area Network (LAN) settings, click LAN Settings.

4. If the Use a proxy server box is selected, select the Bypass proxy server for local addresses box.

5. Click OK twice.

Viewing Localized Versions of the Web-Based Interface
When using Internet Explorer or Netscape Navigator on systems running Microsoft Windows, to view localized versions of the DRAC 4 Web-based interface, do
the following:

NOTE: The racadm CLI utility is installed automatically for all other supported operating systems when you install the Systems Management CD.