User's Manual

Default
1

Description
0=Disable, 1=Enable

cfgRacTuneHostCom2BaudRate (Read/Write)

Legal Values
115200, 57600, 19200, and 9600

Default
57600

cfgRacTuneConRedirPort (Read/Write)

Legal Values
0-65535

Default
5900 (0x170c)

Description
Determines the port used during vKVM sessions with the Console Redirection window. After changing this property, the RAC must be reset prior to opening
any new Console Redirection sessions. (Type hexadecimal values.)
ifcRacManagedNodeOs
This group contains parameters to configure the DRAC 4 with managed system and operating system naming information.
One instance of the group is allowed. The following subsections describe the objects in this group.

ifcRacMnOsHostname (Read/Write)

Legal Values
A string of up to 255 ASCII characters.

Default
NOTE: To modify this property, you must have Configure DRAC 4 permission.
NOTE: For best results when redirecting BIOS System Setup screens, Dell recommends setting this baud rate to 57600.
NOTE: To modify this property, you must have Configure DRAC 4 permission.
NOTE: This object requires a DRAC 4 reset before it becomes active.
NOTE: To modify this property, you must have Configure DRAC 4 permission.