User's Manual

Following the modification of the network tuning, the DRAC 4 must be reset for the new tuning values to take effect. After the DRAC 4 has been reset, it should
be available for use in a normal or satellite network configuration.
cfgOobSnmp
The group contains parameters to configure the SNMP agent and trap capabilities of the DRAC 4.
One instance of the group is allowed. The following subsections describe the objects in this group.

cfgOobSnmpAgentCommunity

Legal Values
A string of up to 31 ASCII characters.

Default
public

Description
Use this to modify the SNMP Community Name.

cfgOobSnmpTrapsEnable (Read/Write)

Legal Values
Boolean, either 1 or 0 (TRUE or FALSE)

Default
1

Description
0=Disable, 1=Enable transmission of SNMP traps.

cfgOobSnmpAgentEnable (Read/Write)

cfgNetTuningNicMtu
0x5dc
0x1f4
cfgNetTuningIpTtl
0x40
0x80
cfgNetTuningIpReassTtl
0x3c
0x78
cfgNetTuningTcpSrttBase
0
0x100
cfgNetTuningTcpSrttDflt
0x6
0x180
cfgNetTuningTcpReXmtMin
0
0
cfgNetTuningTcpReXmtMax
0x80
0x400
cfgNetTuningTcpMsl
0x3c
0xf0
NOTICE: Although you can configure these parameters, it is recommended that you only use the settings described here. Other settings may adversely
effect the DRAC 4's ability to communicate with other network nodes.
NOTE: To modify this property, you must have Configure DRAC 4 permission.
NOTE: To modify this property, you must have Configure DRAC 4 permission. This object requires a DRAC 4 reset before it becomes active.
NOTE: To modify this property, you must have Configure DRAC 4 permission. This object requires a DRAC 4 reset before it becomes active.