User's Manual

ThemaximumnumberofTCPretransmissiontimein½secondunits.(Typehexadecimalvalues.)

cfgNetTuningTcpMsl (Read/Write)\

Legal Values
Integer from 60 to 240.

Default
0x3c (60)

Description
ThemaximumTCPsegmentlifetimein½secondunits.(Typehexadecimalvalues.)

cfgNetTuningIpSubnetsAreLocal (Read/Write)

Legal Values
1 or 0

Default
1

Description
Packets addressed to subnets of the local net do not go to the gateway.

Tuning the DRAC 4 for Satellite Connectivity
The racadm CLI may be used to modify the network tuning properties of the DRAC 4. It is also possible to use the racadm.cfg file to modify these properties
(similar to the manner in which .ini files are used).
racadm config -g cfgNetTuning -o cfgNetTuningNicMtu <value>
racadm config -g cfgNetTuning -o cfgNetTuningIpTtl <value>
racadm config -g cfgNetTuning -o cfgNetTuningIpReassTtl <value>
racadm config -g cfgNetTuning -o cfgNetTuningTcpSrttBase <value>
racadm config -g cfgNetTuning -o cfgNetTuningTcpSrttDflt <value>
racadm config -g cfgNetTuning -o cfgNetTuningTcpReXmtMin <value>
racadm config -g cfgNetTuning -o cfgNetTuningTcpReXmtMax <value>
racadm config -g cfgNetTuning -o cfgNetTuningTcpMsl <value>
where <value> is obtained from TableB-2.
Table B-2. DRAC 4 Properties for Satellite Connectivity
NOTE: To modify this property, you must have Configure DRAC 4 permission.
NOTE: To modify this property, you must have Configure DRAC 4 permission.

Property

Normal Value

Satellite Value