User's Manual

Description
The maximum number of time (in seconds) of line idle time before the line is disconnected. (Type hexadecimal values.)

cfgSerialConsoleShellType (Read/Write)

Default
Default 2

Legal Values
1 = VT100 block screen interface, has limited command function compared to type 2.
2 =UNIX®-style command line data stream interface.

Description
Sets the serial console shell type. (Type hexadecimal values.)

cfgSerialConsoleNoAuth (Read/Write)

Description
Allows you to disable authentication on the serial shell.

Default
0

Legal Values
0 – Login prompt is Enabled on the serial shell.
1 – Login prompt is Disabled on serial shell.

cfgSerialConsoleCommand (Read/Write)

Description
The serial command runs after login at the start of a session and allows you to set up a command such as connect com2 that autoruns when a session
begins.

Default
Empty string (no command).

Example
connect com2
NOTE: To modify this property, you must have Configure DRAC 4 permission.
NOTE: To modify this property, you must have Configure DRAC 4 permission.
NOTE: To modify this property, you must have Configure DRAC 4 permission.