User's Manual

String of up to 255 ASCII characters that designate a valid path name.

Default
""

Description
The path name pointing to the firmware update binary file. If this is a file name only, then the path needs to be specified in the TFTP server. Otherwise, the
entire path can be specified here.
cfgUserAdmin
This group contains parameters that you can use to configure which users are allowed access to the DRAC 4.
Sixteen instances of the group are allowed, which corresponds to a user for each index. The following subsections describe the objects in this group.

cfgUserAdminPrivilege (Read/Write)

Legal Values
0x80000000 to 0x800001ff, and 0x0

Default
0

Description
Use the bit mask numbers in TableB-1 to set role-based authority privileges for a DRAC 4 user.
Table B-1. Bit Masks for User Privileges

cfgUserAdminUserName (Read/Write)

Legal Values
A string of up to 19 ASCII characters.

NOTE: The server may still require you to specify the drive (for example, C).
NOTE: To modify this property, you must have Configure Users permission.

User Privilege

Bit Mask
Log In To DRAC 4
0x80000001
Configure DRAC 4
0x80000002
Configure Users
0x80000004
Clear Logs
0x80000008
Execute Server Control Commands
0x80000010
Access Console Redirection
0x80000020
Access Virtual Media
0x80000040
Test Alerts
0x80000080
Execute Debug Commands
0x80000100
NOTE: To modify this property, you must have Configure Users permission.