Release Notes

Issue 16
Description
The Front Panel page in the iDRAC7 Web interface and the physical LCD on the server front panel may display IPv6 address
as undefined even if IPv6 was enabled.
Resolution
Perform one of the following to view the IPv6 address:
 Wait for the IPV6 DHCP6 server to respond and display the IPv6 address.
or
 In the iDRAC7 Web interface, go to Overview > iDRAC Settings > Properties . Under the Current IPv6 Settings
section, see Link Local Address, which is the IPv6 address.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC7.
Issue 17
Description
When a driver pack DUP update is performed, the following message is recorded in the Lifecycle log after the driver pack
update entry.
RAC0400: iDRAC memory low
iDRAC is running low on memory. System performance may be degraded.
Recommended Action: No response action is required.
Resolution
No workaround is required. This is a normal condition when the memory is lower than the threshold for around 30 seconds
and returns to normal after the drive pack update.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC7.
Issue 18
Description
Resetting iDRAC7 to default values action may take between four to six minutes to complete.
Resolution
Wait for iDRAC7 to reboot before performing any other action.
Versions/Systems Affected
All Dell PowerEdge systems with iDRAC7.