User's Manual

7. In the New Passphrase text box, enter the passphrase that will be associated with the new encryption key
identifier
Related Links
Local Key Encryption Mode
Removing Encryption and Deleting Data
To remove the encryption and delete the data on the virtual disks:
1. In the left pane, click Hardware Configuration.
2. In the right pane, click Configuration Wizards and click Key Encryption.
3. Select the controller on which you must remove the key that was applied and click Next.
4. In the right pane, select Remove encryption and delete data and click Next.
5. Select Delete encryption key and all secure virtual disks and click Finish.
CAUTION: The existing encryption, virtual drives, and all the data are permanently deleted.
Related Links
Local Key Encryption Mode
Breaking Mirrored Drives
To split the mirrored array of RAID-1 virtual drives:
1. In the left pane, click Hardware Configuration.
2. In the right pane, click Configuration Wizards.
3. Under Storage Configuration wizards, click Break Mirror.
The Break Mirror page is displayed with the mirrored virtual drives.
4. Select the related controller and click Finish.
NOTE: Break Mirror feature does not support software RAID controllers.
The system automatically turns off even if one mirrored array is successfully delinked.
System Setup-Advanced Hardware Configuration
Lifecycle Controller Advanced Hardware Configuration wizards allow you to configure BIOS, iDRAC, and certain devices
such as NIC, and RAID controllers through Human Interface Infrastructure (HII). HII is a UEFI-standard method for
viewing and setting a device's configuration. You can utilize a single utility to configure multiple devices that may have
different pre-boot configuration utilities. The utilities also provide localized versions of devices such as the BIOS setup.
On the basis of system configuration, other device types may also appear under
Advanced Hardware Configuration
if
they support the HII configuration standard.
The Advanced Hardware Configuration wizard allows you to configure the following:
NOTE: You can also, use System Setup utility during startup to configure the following devices. For more
information about the System Setup utility, see the Using The System Setup Program And Boot Manager in this
User's Guide.
System BIOS Settings
iDRAC Settings
47