User's Manual

About View and Export Current Inventory
About View and Export Factory-Shipped Inventory
USB Drive
Network Share
USB Drive
To export to a USB drive:
1. From the Select Device drop-down list, select the USB drive.
2. In the File Location text box, enter a valid directory or sub-directory path on the device. For example, 2011\Nov. If
the path is not provided, the file is stored in the root location of the device.
NOTE: Lifecycle Controller allows 256 characters in a path, and does not support special characters such as :,
*, ?, ", <, >, |, #, %, and ^ in folder names.
Network Share
To export to a Network Share, select CIFS or NFS and type the required details.
Related Links
CIFS
NFS
CIFS
For CIFS, type the following details:
• Share Name — Type the path to the shared folder to export the file. For example, type \\192.168.20.26\sharename
or \\servername\sharename.
• Domain and User Name — Type the domain and user name required to log on to the network share. For
example, loginname@myDomain or domain\user name. If there is no domain, type the user name.
• Password — Type the correct password.
• File Location — Type the sub-directories, if any. For example, 2011\Nov.
NOTE: Lifecycle Controller allows 256 characters in a path, and does not support special characters such
as :, *, ?, ", <, >, |, #, %, and ^ in folder names.
NFS
For NFS, type the following details:
• Share Name — Type the path to the shared folder where you must store the file. For example, \\xxx.xxx.xx.xx
\sharename.
• File Location — Type the sub-directories, if any. For example, 2011\Nov.
NOTE: Lifecycle Controller allows 256 characters in a path, and does not support special characters such
as :, *, ?, ", <, >, |, #, %, and ^ in folder names.
Viewing or Exporting Hardware Inventory After Part Replacement
To view or export the hardware inventory after part replacement:
1. Launch Lifecycle Controller.
2. In the left pane, click Hardware Configuration.
23