White Papers

Platform Rollback – Select Components Figure 65.
3. Select the components and click Apply.
4. Select the rollback image that you want to apply to the system and click Apply.
After the rollback process is complete, the system reboots. When applying more than one
update, the system may need to reboot between each rollback. In such scenarios, the system
boots directly into Lifecycle Controller and continues the rollback process.
View Current Version
Lifecycle Controller enables the user to check the firmware version of the currently installed
components in the system. It displays the firmware version of the component along with the time
stamp when the firmware version was last updated, rolled back, or newly-installed component.
If Collect System Inventory On Restart (CSIOR) is enabled, the inventory collection starts before
launching Lifecycle Controller every time the system is booted. Therefore the View Current Versions
page always displays the latest information. For more information about CSIOR, see Lifecycle
Controller User’s Guide.