White Papers

Dell™ Lifecycle Controller 2 Web Services Interface Guide for Windows Version: 2.1.0
160
VirtualDiskArray: Array of ElementName(s) where each identifies a different VD, currently
only one VD can be passed
EXAMPLE:
winrm i AssignSpare http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_RAIDService
?SystemCreationClassName=DCIM_ComputerSystem
+CreationClassName=DCIM_RAIDService
+SystemName=DCIM:ComputerSystem
+Name=DCIM:RAIDService
-u:[USER] -p:[PASSWORD]
-r:https://[IPADDRESS]/wsman -SkipCNcheck -SkipCAcheck
-encoding:utf-8 -a:basic -file:AssignSpare.xml
The input file AssignSpare.xml is shown below:
<p:AssignSpare_INPUT xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_RAIDService">
<p:Target>Disk.Bay.3:Enclosure.Internal.0-0
:RAID.Integrated.1-1</p:Target>
<p:VirtualDiskArray>Disk.Virtual.0
:RAID.Integrated.1-1</p:VirtualDiskArray>
</p:AssignSpare_INPUT>
OUTPUT:
AssignSpare_OUTPUT
RebootRequired = YES
ReturnValue = 0
Nonconformance to the following restrictions may result in the error message below.
 Virtual disk (VD) referenced (dedicated hot spare) is RAID-0, which cannot have hot spares
 Physical disk (PD) is too small for the virtual disk referenced (dedicated hot spare)
 Physical disk is wrong type for the virtual disk (i.e. SATA PD to be used as hot spare for SAS VD)
 Similar conditions when no VD referenced, which is the global hot spare attempted assignment
ERROR MESSAGE:
AssignSpare_OUTPUT
Message = Physical disk FQDD did not identify a valid physical disk for the operation
MessageID = STOR009
ReturnValue = 2