White Papers

Dell™ Lifecycle Controller 2 Web Services Interface Guide for Windows Version: 2.1.0
157
If no foreign physical disks are available, the following message may result:
ClearForeignConfig_OUTPUT
Message = General failure
MessageID = STOR006
ReturnValue = 2
16.14 Applying the Pending Values for RAID-CreateTargetedConfigJob()
The CreateTargetedConfigJob() method is called to apply the pending values created by RAID
methods. The system will automatically reboot depending on the ScheduledStartTime selected. The
CreateTargetedConfigJob() jobID output with the job control section can be used to obtain its status.
Invoke CreateTargetedConfigJob() with the following parameters and syntax:
TARGET: This parameter is the FQDD of the DCIM_ControllerView (Section 16.7)
RebootJobType: There are three options for rebooting the system.
1 = PowerCycle
2 = Graceful Reboot without forced shutdown
3 = Graceful reboot with forced shutdown
Note: When a user does not want to set a reboot type when creating a target job,
users should comment out the RebootJobType in the input xml. User should not enter
“0” or give no parameter at all in the input xml.
ScheduledStartTime & UntilTime: See Section 3.2.4
EXAMPLE:
winrm i CreateTargetedConfigJob http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_RAIDService
?SystemCreationClassName=DCIM_ComputerSystem
+CreationClassName=DCIM_RAIDService
+SystemName=DCIM:ComputerSystem
+Name=DCIM:RAIDService
-u:[USER] -p:[PASSWORD]
-r:https://[IPADDRESS]/wsman -SkipCNcheck -SkipCAcheck
-encoding:utf-8 -a:basic -file:CreateTargetedConfigJob_RAID.xml
The input file CreateTargetedConfigJob_RAID.xml is shown below:
<p:CreateTargetedConfigJob_INPUT xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cim-
schema/2/root/dcim/DCIM_RAIDService">
<p:Target>RAID.Integrated.1-1</p:Target>
<p:RebootJobType>3</p:RebootJobType>
<p:ScheduledStartTime>TIME_NOW</p:ScheduledStartTime>
<p:UntilTime>20111111111111</p:UntilTime>