White Papers

ManualsBrandsDell ManualsSoftwareLifecycle Controller 2 Release 1.1 Remote Services

141

142

143

144

145

146

147

148

149

150

Dell™ Lifecycle Controller 2 Web Services Interface Guide for Windows Version: 2.1.0

142

RebootRequired = Yes

ReturnValue = 0

SetResult = Set PendingValue

15.15 Setting the iSCSI Boot Target

The SetAttributes() method is used to set or change the values of the iSCSI boot target attributes.

Invoke the SetAttributes() method with the following parameters (from 15.1) and syntax:

Target: FQDD attained through DCIM_NICEnumeration

AttributeName: Attained from AttributeName field

AttributeValue: A new value to assign to the specified NICAttribute. If this value is valid, it is

applied to the PendingValue property or the Currentvalue property of the specified

NICAttribute. Possible choices are attained from PossibleValues field, such as:

Possible values: Disabled, Enabled

EXAMPLE:

winrm i SetAttributes http://schemas.dmtf.org/wbem/wscim/1/cim-

schema/2/root/dcim/DCIM_NICService

?SystemCreationClassName=DCIM_ComputerSystem

+CreationClassName=DCIM_NICService

+SystemName=DCIM:ComputerSystem

+Name=DCIM:NICService

-u:[USER] -p:[PASSWORD]

-r:https://[IPADDRESS]/wsman -SkipCNcheck -SkipCAcheck

-encoding:utf-8 -a:basic -file:SetAttributes_iSCSI_BootTarget.xml

The information in the input file SetAttribute_iSCSI_BootTarget.xml is shown below:

<p:SetAttributes_INPUT xmlns:p="http://schemas.dmtf.org/wbem/wscim/1/cim-

schema/2/root/dcim/DCIM_NICService">

<p:Target>NIC.Integrated.1-1-1</p:Target>

<p:AttributeName>BootToTarget</p:AttributeName>

<p:AttributeValue>Enabled</p:AttributeValue>

<p:AttributeName>IscsiInitiatorIpAddr</p:AttributeName>

<p:AttributeValue>10.10.10.10</p:AttributeValue>

<p:AttributeName>IscsiInitiatorSubnet</p:AttributeName>

<p:AttributeValue>255.255.255.0</p:AttributeValue>

<p:AttributeName>IscsiInitiatorGateway</p:AttributeName>

<p:AttributeValue>10.10.10.1</p:AttributeValue>

<p:AttributeName>IscsiInitiatorPrimDns</p:AttributeName>

<p:AttributeValue>10.10.10.2</p:AttributeValue>

<p:AttributeName>IscsiInitiatorSecDns</p:AttributeName>

<p:AttributeValue>10.10.10.3</p:AttributeValue>

<p:AttributeName>IscsiInitiatorName</p:AttributeName>