White Papers

Dell™ Lifecycle Controller 2 Web Services Interface Guide for Linux Version: 2.1.0
165
<n1:InstanceID>RAID.Integrated.1-1:RAIDBatteryLearnMode
</n1:InstanceID>
<n1:IsReadOnly>false</n1:IsReadOnly>
<n1:PendingValue/>
<n1:PossibleValues>Automatic</n1:PossibleValues>
<n1:PossibleValues>Warn only</n1:PossibleValues>
<n1:PossibleValues>Disabled</n1:PossibleValues>
</n1:DCIM_RAIDEnumeration>
<n1:DCIM_RAIDEnumeration>
<n1:AttributeName>
RAIDdefaultWritePolicy
</n1:AttributeName>
<n1:CurrentValue>
WriteBack</n1:CurrentValue>
<n1:FQDD>
Disk.Virtual.1:RAID.Integrated.1-1
</n1:FQDD>
<n1:InstanceID>Disk.Virtual.1:RAID.Integrated.1-1:RAIDdefaultWritePolicy</n1:InstanceID>
<n1:IsReadOnly>false</n1:IsReadOnly>
<n1:PendingValue/>
<n1:PossibleValues>WriteThrough </n1:PossibleValues>
<n1:PossibleValues>WriteBack</n1:PossibleValues>
<n1:PossibleValues>WriteBackForce</n1:PossibleValues>
</n1:DCIM_RAIDEnumeration>
16.2 Getting a RAID Enumeration Instance
Use the following example to get an instance of the DCIM_RAIDEnumeration class instead of all the
instances as shown in Section 16.1.
Get a RAIDEnumeration instance with the following parameters and syntax:
[INSTANCEID]: This is obtained from the enumeration in Section 16.1, which shows an example
using RAID.Integrated.1-1:RAIDloadBalancedMode as an instanceID.
EXAMPLE:
wsman get http://schemas.dmtf.org/wbem/wscim/1/cim-schema/2/root/dcim/DCIM_RAIDEnumeration
?InstanceID=[INSTANCEID] -h $IPADDRESS -V -v -c dummy.cert -P 443
-u $USERNAME -p $PASSWORD -j utf-8 -y basic
OUTPUT:
<n1:DCIM_RAIDEnumeration>
<n1:AttributeName>RAIDloadBalancedMode</n1:AttributeName>
The ‘set attributes’
method in section
16.19.2 uses the FQDD,
AttributeName, and
PossibleValues fields as
input.