Owner's Manual

Resolution
Make sure that only one iDRAC virtual console is open during Export or Import operation.
Versions/Systems Affected
Lifecycle Controller version 1.6.5
Issue 4
Description
On Broadcom CNA cards, the following combinations of iSCSI and FCoE mode are not handled across partitions:
If FCoE or iSCSI mode is enabled in Partition 1 and FCoE or iSCSI mode is enabled in Partition 2, the FCoE or iSCSI
mode cannot be enabled in partition 3 and 4.
If FCoE or iSCSI mode is enabled in Partition 1 and FCoE or iSCSI mode is enabled in Partition 3, the FCoE or iSCSI
mode cannot be enabled in partition 2 and 4.
If FCoE or iSCSI mode is enabled in Partition 2 and FCoE or iSCSI mode is enabled in Partition 3, the FCoE or iSCSI
mode cannot be enabled in partition 1 and 4.
If FCoE or iSCSI mode is enabled in Partition 2 and FCoE or iSCSI mode is enabled in Partition 4, the FCoE or iSCSI
mode cannot be enabled in partition 1 and 3.
If FCoE or iSCSI mode is enabled in Partition 3 and FCoE or iSCSI mode is enabled in Partition 4, the FCoE or iSCSI
mode cannot be enabled in partition 2 and 1.
If FCoE or iSCSI mode is enabled in Partition 4 and FCoE or iSCSI mode is enabled in Partition 1, the FCoE or iSCSI
mode cannot be enabled in partition 2 and 3.
Resolution
Not applicable.
Versions Affected
Lifecycle Controller version 1.6.5