Users Guide

Use Case Scenarios 99
Smart Card
Authentication
Smart Card Authentication for iDRAC log in.
If enabled, install a Smart Card is installed to
access the iDRAC.
Enable, Disable or
Enable with
RACADM
Table 5-11. Virtual Media Connection Mode
Mode Description
Attached The virtual media devices are available for use in the current
operating environment. Virtual Media enables a floppy image, floppy
drive, or CD/DVD drive from the system, so that it is available on the
managed system’s console, as if the floppy image or drive were
present (attached or connected) on the local system.
Detached The virtual media devices are not accessible.
Auto-Attached The virtual media devices are automatically mapped to the server
every time the user physically connects a media.
Table 5-12. IPv4 Configuration
Attribute Description Values
IPv4 iDRAC NIC IPv4 protocol support. Disabling IPv4
deactivates the controls.
Enable or
Disable
RMCP+
Encryption Key
RMCP+ encryption key configuring (no blanks
allowed). The default setting is all zeros (0).
0 to 40
hexadecimal
IP Address
Source
The ability of the iDRAC NIC to acquire an IPv4
address from the DHCP server.
Disabling IP Address Source deactivates the
Ethernet IP Address, and other user-configured
controls.
Enable or
Disable
Get DNS Servers
from DHCP
iDRAC acquires the DNS from the Dynamic Host
Configuration Protocol (DHCP) server.
Yes or No
Table 5-10. LAN User Configuration
Parameter Description Value