Users Guide

98 Use Case Scenarios
VLAN
Priority
Sets the VLAN ID priority value. Legal values are defined
by IEEE 801.11g specification.
0 to 7
Auto
Negotiate
When auto-negotiate is on, it determines whether iDRAC
automatically sets the Duplex Mode and Network Speed
values by communicating with the nearest router or hub.
When auto-negotiate is off, you must set the Duplex
Mode and Network Speed values manually.
On or Off
LAN Speed Configures the network speed to match the user's network
environment. This option is not available if Auto-
Negotiate is set to On.
10 MB or
100MB
LAN
Duplex
Configures the duplex mode to match the user's network
environment. This option is not available if Auto-
Negotiate is set to On.
Full or Half
Table 5-10. LAN User Configuration
Parameter Description Value
Auto-Discovery Auto discovery of server. Enable or Disable
Provisioning
Server Address
Enter Provisioning server address. IPV4 or IPV6 or
Host Name
Account Access Disabling account access deactivates all other
fields on the LAN User Configuration.
Enable or Disable
Account
Username
Enables the modification of an iDRAC user
name.
Maximum of 16
printable
ASCII characters
Password Enables an administrator to specify or edit
the iDRAC user's password (Encrypted).
Maximum of 20
characters
Confirm
Password
Re-enter the iDRAC user's password to
confirm.
Maximum of 20
characters
Account Privilege Assigns the user's maximum privilege on the
IPMI LAN channel to the user groups.
Admin, Operator,
User, or No Access
Table 5-9. LAN Attributes
Attribute Description Values