Users Guide

Remote Services Operations 29
• Auto-Discovery feature does not use the newly set provisioning server IP
address/hostname for any handshakes in progress, but is used only during
the next handshake process.
• Auto-Discovery feature supports setting multiple IP addresses and/or host
names using the following format:
• The string is a list of IP addresses and/or host names and ports
separated by comma.
• Hostname is qualified.
• IPv4 address – starts with ‘(‘ and ends with ‘)’ when specified at the
same time with a hostname.
• Each IP address or hostname can be optionally followed by a ‘:’ and a
port number.
• Examples of valid strings are - hostname, hostname.domain.com.
Setting Provisioning Server using the USC Console
1 Press <F10> System Services when prompted within 5 seconds during
system startup.
The Unified Server Configurator Lifecycle Controller Enabled screen is
displayed.
2 Navigate to Hardware Configuration  Configuration Wizard 
iDRAC6 Configuration .
3 Use the Next button to navigate to the LAN User Configuration screen.
4 Navigate to the Provisioning Server Addresses screen.
5 Enter the IP/hostname string of the Provisioning Server host.
6 Click Next and then click Apply .
7 Click Finish .
8 Click Exit and Reboot . Confirm exit.
Set Provisioning Server using iDRAC6 Configuration Utility
1 Press <Ctrl+E> when prompted within 5 seconds during system start-
up.
The iDRAC6 Configuration Utility screen is displayed.