Users Guide

104 Use Case Scenarios
Reporting iDRAC IP Address Change
To report Service Tag or IP address change from iDRAC to SCCM. An Simple
Object Access Protocol (SOAP) message is sent to indicate iDRAC IP address
change. The feature notifies the provisioning servers that the iDRAC IP
address has changed for the system associated with the service tag.
Prerequisites
To successfully perform remote operations on the server, make sure that the
following prerequisites are met:
• Common Prerequisites
Feature or System Behavior
• If the provisioning server iDRAC Attribute is set, the attribute value is
used, else the provisioning server is determined using one of these options:
DHCP vendor, DNS SRV record, or default provisioning server hostname.
• Feature is disabled by default.
• Feature initiates a handshake even though Discovery and Handshake is
disabled or complete.
• The provisioning server must request that it is notified of the IP changes.
• Needs to support the notification of multiple provisioning servers.
Profiles
DCIM-iDRAC_Card_Profile
MOFs
DCIM_iDRACCardEnumeration.mof
DCIM_iDRACCardInteger.mof
DCIM_iDRACCardService.mof
DCIM_iDRACCardString.mof
DCIM_iDRACCardView.mof
Table 5-15. Step Number and Location
Step Number Location in Lifecycle Controller Web Services Interface Guide
(Windows or Linux)