Release Notes
Table Of Contents
- Dell Lifecycle Controller USC-LCE Version 1.5.5 Readme
- What’s New?
- Prerequisites for using USC-LCE
- Supported Dell Systems and Operating Sys
- Installation and Configuration
- Open Issues, Limitations, and Resolution
- Issue 1
- Issue 2
- Issue 3
- Issue 4
- Issue 5
- Issue 6
- Issue 7
- Issue 8
- Issue 9
- Issue 10
- Issue 11
- Issue 12
- Issue 13
- Issue 14
- Issue 15
- Issue 16
- Issue 17
- Issue 18
- Issue 19
- Issue 20
- Issue 21
- Issue 22
- Issue 23
- Issue 24
- Issue 25
- Issue 26
- Issue 27
- Issue 28
- Issue 29
- Issue 30
- Issue 31
- Issue 32
- Issue 33
- Issue 34
- Issue 35
- Global Support
What’s New?
Added support for the following adapter on M910 and M915 servers:
Broadcom 57810 Dual Port 10GbE KR Blade Converged Mezzanine Card
Added support for the following adapter on M610, M710HD, M910, and M915 servers:
Qlogic QME8252-K Mezz
Added support for the following adapters on R715, R815, and R910 servers:
o Qlogic P3+ Dual port 10Gb SFP+/DA
o Broadcom 57810 Dual Port 10Gb Base-T -CNA
o Broadcom 57810 Dual Port 10GbE SFP+ Converged Network Adapter
Prerequisites for using USC-LCE
For Blade systems, iDRAC version 3.4
For Rack and Tower systems, iDRAC version 1.9
Supported Dell Systems and Operating Systems
For the list of Dell systems and operating systems that can be deployed on the target systems, see the
"Lifecycle Controller – Supported Dell Systems and Operating Systems" section in the "Dell Systems Software
Support Matrix" available at support.dell.com/manuals. On the Manuals page, click Software > Systems
Management > Dell OpenManage Releases. Select the relevant OpenManage release version and click Dell
System Software Support Matrix.
Only VMware ESX 4.1 or later operating systems are supported on Intel Xeon processor E7 family.
Installation and Configuration
NA
Open Issues, Limitations, and Resolutions
Fixed Issues/def
Issue 1
Description
After you apply newer firmware on H200i storage controllers, there is a delay of 2 to 3 minutes before
reboot.
Issue 2
Description
The drivers exposed by USC are present in a read-only device labeled OEMDRV, and the device is active for
18 hours. In a Microsoft(r) Windows(r) and Linux environment, the drivers are automatically installed and
no further action is required. In Red Hat Enterprise Linux version 4.8 only, the drivers are not automatically
installed and you have to install the drivers manually after the OS installation has been completed.