Users Guide

94 Troubleshooting and Frequently Asked Questions
7 Can I update the drivers used by an installed operating system through
USC or USC-LCE?
No. USC or USC-LCE only provides drivers that are required for operating
system installation. To update the drivers used by an installed operating
system, see
your operating system’s help documentation.
8 Can I add my own drivers and firmware for updating USC or USC-LCE
to a local USB device?
No. Only drivers and firmware downloaded from the Dell Server Updates
DVD’s are supported. See "Configuring a Local USB Device" on page 79
for more information.
9 Can I delete USC or USC-LCE?
No.
10 Can I use virtual media for the operating system media source during
installation?
Yes. See the Integrated Dell Remote Access Controller 6 (iDRAC6) User’s
Guide
for your system’s iDRAC device for more information (available at
support.dell.com/manuals ).
11 Can I use a virtual USB for my update repository?
Yes. See the Integrated Dell Remote Access Controller 6 (iDRAC6) User’s
Guide
for your system’s iDRAC device for more information (available at
support.dell.com/manuals ).
12 What is UEFI? With which version does USC or USC-LCE comply?
UEFI (Unified Extensible Firmware Interface) is a specification that
details an interface for transitioning control from the pre-boot
environment to the operating system. USC or USC-LCE complies with
UEFI version 2.1. See
www.uefi.org for more information.
LC1_4.book Page 94 Friday, October 22, 2010 2:45 AM