Users Guide

Troubleshooting and Frequently Asked Questions 91
Repairing the USC and USC-LCE
Repairing USC
If the message System Services update required appears during
power-on self-test (POST), the embedded device that stores USC may
contain corrupted data.
To resolve the issue, try to update USC by executing
USC Dell Update Package (DUP) from the operating system. See the
Dell
Update Packages User’s Guide
available at support.dell.com/manuals for more
information.
Repairing USC-LCE
If the message System Services update required appears during
power-on self-test (POST), the embedded device that stores USC-LCE may
contain corrupted data.
To resolve the issue, you must first attempt to update
USC - LCE by executing USC-LCE Dell Update Package (DUP). See the
Dell Update Packages User’s Guide available at support.dell.com/manuals
for more information. If running the DUP does not solve the problem,
use USC-LCE repair package:
1 Go to ftp.dell.com  LifecycleController and download the file named
USC_1.4.0_Rep_Pack_A00.usc (or newer version) to a temporary location.
2 Connect to iDRAC on your system using the iDRAC Web interface.
For
more information on iDRAC, see the Integrated Dell Remote Access
Controller 6 (iDRAC6) User’s Guide
.
3 From the iDRAC Web interface, click Remote Access .
4 Select the Update tab, and then browse to USC-LCE Repair Package you
downloaded from
ftp.dell.com .
The Update Package is
not supported for this
System
Ensure that the DUP is supported on the system.
Invalid Update Package Ensure that the DUP is not corrupt or tampered.
Table A-3. USC-LCE Error Messages and Resolutions (continued)
Error Message Resolution
LC1_4.book Page 91 Friday, October 22, 2010 2:45 AM