Users Guide

Troubleshooting and Frequently Asked Questions 89
An error occurred. One
or more settings may
not be saved.
An error occurred when changing Hardware Advanced
Configuration settings. To resolve this issue:
1 Reboot the system.
2 Re-enter USC-LCE by pressing the <F10> key.
3 Change the settings again.
An error occurred. One
or more settings may
not be restored.
An error occurred when restoring Hardware Advanced
Configuration settings. To resolve this issue:
1 Reboot the system.
2 Re-enter USC-LCE by pressing the <F10> key.
Re-open the Advanced Configuration screen.
This feature is not
supported in this
configuration
Your modular system does not support the feature you
selected.
NFS Support is not
present
Type the correct NFS share name and retry.
No Share Name/Details
present
Type the correct share name or username and password, and
retry.
Failed to authenticate.
Invalid share name,
username, or password.
Type the correct share name or username and password, and
retry.
Invalid Catalog File Type the correct path to the catalog file, or the correct
catalog name.
Could not Connect the
Share
This error may occur due to temporary network problems. If
this issue persists, check the network connection and then
retry.
Network Share Mount
Failed
This error may occur due to temporary network problems. If
this issue persists, check the network connection and then
retry.
Table A-3. USC-LCE Error Messages and Resolutions (continued)
Error Message Resolution
LC1_4.book Page 89 Friday, October 22, 2010 2:45 AM