Users Guide

Troubleshooting and Frequently Asked Questions 83
Please enter a valid
IPv4 Address for
this iDRAC
Enter a valid IPv4 protocol address for iDRAC that is
between 0.0.0.0 and 255.255.255.255.
Please enter a valid
Subnet Mask
Enter a valid Subnet Mask that is between 0.0.0.0 and
255.255.255.255.
Please enter a valid
Default Gateway
Address
Enter a valid default gateway address that is between
0.0.0.0 and 255.255.255.255.
Please enter a valid IPv4
DNS Server 1 Address
Enter a valid IPv4 DNS Server1 address that is between
0.0.0.0 and 255.255.255.255.
Please enter a valid IPv4
DNS Server 2 Address
Enter a valid IPv4 DNS Server2 address that is between
0.0.0.0 and 255.255.255.255.
Account access change
failed. Multiple user
accounts required. See
help for details.
You must create another user account. Click the Help
button in the upper-right corner of the screen for
more information.
Please enter a valid
Username
You must enter a valid user name. To maintain
compatibility with other iDRAC configuration tools,
Dell recommends using only digits (0–9),
alphanumeric characters (a–z, A–Z), and hyphens (–)
in the user name string.
Please enter a valid
Password
You must enter a valid password. To maintain compatibility
with other iDRAC configuration tools, Dell recommends
using only digits (0–9), alphanumeric characters
(a–z, A–Z), and hyphens (–) in the password string.
Please enter a valid
Confirmation password
You must re-enter the new password and the
confirmation password. Be certain that both passwords
are exactly the same.
Mount partition failed
during OS deployment
Retry the operation. If the issue persists, reboot iDRAC.
Ping Test Failed This error may occur due to temporary network problems.
If this issue persists, check the network connection and
then retry.
Table A-1. USC and USC-LCE Error Messages and Resolutions
(continued)
Error Message Resolution
LC1_4.book Page 83 Friday, October 22, 2010 2:45 AM