Users Guide

62 USC and USC - LCE
To configure RAID:
1 Click OS Deployment on the left pane.
2 Select Configure RAID Now . The system will display all the storage
controllers available for configuration, including the series 6 and 7
controllers.
3 Select a storage controller.
The RAID Configuration options are displayed.
4 Complete RAID settings and click Finish.
The RAID configuration is applied on the disks.
Viewing Secure Capability Status and Virtual Disks of the Series 7 Controller
You can create, change or delete the security key on security-capable
controllers. Setting a security key allows you to create secured virtual disks
using Self Encryption Disks (SED).
To view the secure capability status and virtual disks of the series 7 controller,
follow these steps:
1 Click OS Deployment on the left pane. The Configure RAID wizard and
Install operating system options are displayed.
2 Select Configure RAID Now . The number of virtual disks present on every
controller is displayed, along with information on whether the virtual disk
is secure. The controllers with security capability are displayed suffixed
with the phrase
Security Capable .
Creating a Secure Virtual Disk on Series 7 Controller
NOTE: To create secure virtual disks using USC-LCE, navigate to Hardware
Configuration Tab Configuration WizardsRAID Security Key Configuration.
To create a secure virtual disk on series 7 controller, follow these steps:
1 Click OS Deployment on the left pane.
The Configure RAID Now and Go Directly to OS deployment options
are displayed.
2 Select Configure RAID Now . The number of virtual disks present on every
controller is displayed, along with information on whether the virtual disk
is secure.
LC1_4.book Page 62 Friday, October 22, 2010 2:45 AM