Users Guide

USC and USC - LCE 53
• Confirm Password — Re-enter the iDRAC user's password to confirm.
• Account Privilege — Assigns the user's maximum privilege on the IPMI
LAN channel to one of the following user groups: Admin, Operator, User,
or No Access.
– Admin — Privileges: Login to iDRAC, Configure iDRAC, Configure
Users, Clear Logs, Execute Server Control Commands, Access
Console Redirection, Access Virtual Media, Test Alerts, Execute
Diagnostic Commands
– Operator — Privileges: Login to iDRAC, Configure iDRAC,
Configure Users, Execute Server Control Commands, Access Console
Redirection, Access Virtual Media, Test Alerts, Execute Diagnostic
Commands
– User — Privileges: Login to iDRAC
– No Access — No assigned privileges
• Smart Card Authentication — Enables or disables Smart Card
Authentication for iDRAC log in. If enabled, a Smart Card must be
installed to access the iDRAC.
– Enabled — Enabling Smart Card login disables all command-line
out-of-band interfaces including SSM, Telnet, Serial,
remote
RACADM, and IPMI over LAN.
– Disabled — On subsequent logins from the graphical user interface
(GUI), the regular login page displays. All command-line out-of-band
interfaces—including Secure Shell (SSH), Telnet, Serial, and
RACADM—are set to their default states.
– Enabled with RACADM — Enabling smart card login with
RACADM disables all command-line out-of-band interfaces—
including SSM, Telnet, Serial, remote RACADM, and IPMI over
LAN—while still allowing RACADM access.
Click Next to proceed to the following section.
Summary
Displays the summary of the iDRAC configuration changes.
Click Apply to proceed to the following section.
LC1_4.book Page 53 Friday, October 22, 2010 2:45 AM