Users Guide

52 USC and USC - LCE
• Attached - The virtual media devices are available for use in the current
operating environment. Virtual Media enables a floppy image, floppy
drive, or CD/DVD drive from your system to be available on the managed
system’s console, as if the floppy image or drive were present (attached or
connected) on the local system.
• Detached - The virtual media devices are not accessible.
• Auto-attached - The virtual media devices are automatically mapped to
the server every time the user physically connects a media.
Click Next to proceed to the following section.
LAN User Configuration
Set account access, account-related attributes, and smart card authentication
using one of the following methods:
• Auto-Discovery - Enables or disables auto-discovery.
• Provisioning Server Address - Enables you to enter the Provisioning Server
address; valid address formats are IPv4, IPv6, or the provisioning server
hostname.
Provisioning Server address criteria are:
– A list of IP addresses and/or hostnames and ports separated by comma.
– Hostname can be fully qualified.
– IPv4 address – starts with ‘(‘ and ends with ‘)’ when specified at the
same time with a hostname.
– Each IP address or hostname can be optionally followed by a ‘:’ and a
port number.
– Example of valid strings are - hostname, hostname.domain.com
• Account Access — Enables or disables account access. Disabling account
access deactivates all other fields on the
LAN User Configuration screen.
• Account Username — Enables the modification of an iDRAC username.
The
Account Username field accepts a maximum of 16 printable
ASCII
characters.
• Password — Enables an administrator to specify or edit the iDRAC user's
password. The
Password string is encrypted and cannot be seen or
displayed after this property is set. The
Password field accepts a maximum
of 20 characters.
LC1_4.book Page 52 Friday, October 22, 2010 2:45 AM