Users Guide

44 USC and USC - LCE
4 Set System Control Panel Access to one of the following options:
• Disabled — You do not have access to information or control,
other
than the information displayed by the management controller,
and you cannot specify actions.
• View Only — You can move through the data screens to obtain
information using the system control panel interface.
• View and Modify — You can obtain information and make changes
using the system control panel interface.
5 Click Finish to apply the changes.
To return to the Configuration Wizards screen, click Back. To exit the
wizard, click Cancel.
System Date/Time Configuration
Use the System Date/Time Configuration Wizard to set the date and time
for the system.
To launch the System Date/Time Configuration Wizard:
1 Click Hardware Configuration in the left pane.
2 Click Configuration Wizards in the right pane.
3 Click System Date/Time Configuration to launch the wizard.
The default system date and system time shown in USC-LCE is the date
and
time reported by the system BIOS.
4 Modify the System Date and Time (HH:MM:SS AM/PM) values,
as
required.
5 Click Finish to apply the changes.
To return to the Configuration Wizards screen, click Back. To exit the
wizard, click Cancel.
LC1_4.book Page 44 Friday, October 22, 2010 2:45 AM