Users Guide

USC and USC - LCE 41
Selecting and Applying the Updates
The Select Updates screen displays a list of available updates.
1 Select the check box for each update that you want to apply to your
system. The components for which a more current update is available
are
selected by default.
If you want to compare the version of the update with the version
currently
installed on the system, compare the versions in the
Current and Available fields.
• Component — Displays the available updates. Select the check box
for each update you want to apply.
• Current — Displays the component version currently installed
on
the system.
• Available — Displays the version of the available update.
2 Click Apply .
Post-requisites
• The system reboots after the update process is complete. When applying
more than one update, the system may need to reboot between updates. In
this case, the system boots directly into USC-LCE and continues the
update process. No
action on your part is required when the system
reboots to complete the update
process.
• If the iDRAC firmware update is interrupted for any reason, you may need
to
wait for up to 30 minutes before attempting another firmware update.
Important
• USC-LCE does not support the update or rollback of PERC 5/E Adapter
for external storage, SAS 5i/R Adapter for tape, PERC S100 and PERC
S300 Adapters, and Intel NIC Adapters.
•A NIC wrapper.efi error may be displayed if you try updating the NIC
using platform update in USC without the latest versions of iDRAC and
BIOS. Upgrade to the latest BIOS and iDRAC versions to ensure this error
does not occur.
CAUTION: While using USC to update the power supply unit firmware, the system
will shut down after the first task. It will take a couple of minutes to update the
PSU firmware and then automatically turn on.
LC1_4.book Page 41 Friday, October 22, 2010 2:45 AM