Users Guide

36 USC and USC - LCE

Insert the driver update disk (DUD) when prompted, and specify the

location of the USB drive and press

<Enter>

Complete the installation as directed by the installation program.

Hardware Diagnostics

Performing Hardware Diagnostics

To start the hardware diagnostics utility, click Hardware Diagnostics in the

left pane and click Run Hardware Diagnostics in the right pane. When the

diagnostics utility launches, follow the instructions on the screen.

You must reboot your system to exit the Hardware Diagnostics utility and

press <F10> to re-enter USC or USC-LCE.

The results of the diagnostics tests are displayed on the screen when the tests

complete. The test results describe the problems found. Use this information

to search from support.dell.com for details on resolving the problem.

If you want to exit the Hardware Diagnostics utility, press the <Esc> key;

this causes the system to reboot.

Updating the Hardware Diagnostics Utility

For Systems Supporting USC

Download the required Dell Update Package (DUP) from support.dell.com.

Run the DUP as an executable in the installed operating system.

For Systems Supporting USC-LCE

Use the Platform Update wizard to update the hardware diagnostics utility.

See "Updating the Platform using the Platform Update Wizard" on page 37

for more information. Alternatively, you can also download the required DUP

from support.dell.com and run the DUP as an executable in the installed

operating system.

LC1_4.book Page 36 Friday, October 22, 2010 2:45 AM