Users Guide

32 USC and USC - LCE

• For installing a custom operating system, select the required operating

system from the list and click

The drivers are extracted and USC or USC-LCE prompts you to insert the

operating system installation media.

• For installing an operating system that is not available in the list, select the

option

Any Other Operating System

and click

The drivers are not extracted, so prepare the drivers for the required

operating system.

Driver Extraction

• For Microsoft Windows operating system, the drivers are extracted to an

internal USB drive named

OEMDRV

• For Red Hat Enterprise Linux 4.8 operating system, the drivers are

extracted to

OEMDRV

under

/oemdrv/*.rpm

. Manually install the

extracted drivers after the installation is complete. See

"Installing the

Drivers for RHEL 4.8 Operating System" on page 32 for more information

on driver installation.

Installing the Drivers for RHEL 4.8 Operating System

To install the drivers after the RHEL 4.8 operating system installation:

Use the following command to mount the USB device containing the

operating system drivers labeled

OEMDRV

mkdir OEMDRV

mount /dev/sdc1 /mnt/OEMDRV

NOTE: Path to the operating system drivers on the OEMDRV drive:

/oemdrv/*.rpm

Use the command

rpm -Uvh *.rpm

to install the drivers.

LC1_4.book Page 32 Friday, October 22, 2010 2:45 AM