Users Guide
USC and USC - LCE 29
4
USC and USC-LCE Operations
This section provides the tasks required to perform different operations on
the Unified Server Configurator (USC) and Unified Server Configurator-
Lifecycle Controller Enabled (USC-LCE).
USC and USC - LCE Common Features
Launching the Operating System Deployment Wizard
1
To launch USC, boot your system and press the
<F10> key
within
10 seconds of the Dell logo being displayed.
2
Click
OS Deployment
in the left pane.
3
Click
Deploy OS
in the right pane.
4
For
USC
, continue with the "Selecting the Operating System Driver
Source Location (for USC only)" on page 29 procedure that follows.
5
For
USC-LCE
,
if your system has a RAID controller, continue with
"Optional RAID Configuration
" on page 31
. If your system does not have
a RAID controller, continue with "Selecting an Operating System
" on
page 31
.
Selecting the Operating System Driver Source Location (for USC only)
Use this screen to select the driver required for operating system installation.
Download operating system drivers from an online repository or from a local
device (USB, network share, or DVD).
1
Select either
Online Repository
or
Local Drive
.
FTP Repository
Select
FTP Repository
to download drivers from an FTP server. Enter the
appropriate information according to the method you are using to access
the FTP server.
If you use a firewall, you should configure it to allow outgoing FTP traffic
on port 21. The firewall must also be configured to accept incoming FTP
response traffic.
LC1_4.book Page 29 Friday, October 22, 2010 2:45 AM