Users Guide

Getting Started With USC or USC-LCE 17
• System Services not available — Another process is currently using
iDRAC. It is recommended that you wait for 30 minutes for the current
process to
complete, then reboot your system and try to enter USC or
USC
- LCE again.
If you believe the system is in an error condition or if you cannot wait the
recommended 30-minute time period, see "Canceling Request to Enter
System Services" on page 19. After rebooting, try to enter USC or USC - LCE
again. The first time you launch USC or USC-LCE, it displays USC Settings
wizard that allows you to configure your preferred language and network
settings. See "Using USC Settings Wizard" on page 19 for more information.
Using the Wizards
Wizard Description
USC and USC-LCE provides the following wizards based on your system’s
configuration:
• OS Deployment — Enables you to install an operating system. See
"Operating System Deployment" on page 21 for more information.
• Hardware Diagnostics — Enables you to perform diagnostics to validate
the memory, I/O devices, CPU, physical disks, and other peripherals.
See
"Hardware Diagnostics " on page 23 for more information.
• USC Settings — Enables you to specify the language, keyboard layout,
and
network settings to be used with USC or USC-LCE. See "Using USC
Settings Wizard" on page 19 for more information.
Along with the above mentioned wizards, USC and USC-LCE provides the
following options:
• Home — Enables you to navigate back to Home screen.
• About — Enables you to view the version information of USC-LCE and
UEFI. Click
View Readme in the About wizard to view USC-LCE readme.
USC-LCE provides the following additional wizards based on your system’s
configuration:
• Platform Update — Enables you to apply updates for your system. You can
download the updates from
ftp.dell.com , access from an USB device
attached to your system, or from a network share. See
"Updating the
LC1_4.book Page 17 Friday, October 22, 2010 2:45 AM