User's Manual

Remote Services Profiles 65
•The CreateTargetedConfigJob() method is used to apply the pending
values created by other methods. The successful execution of this method
creates a job for application of pending attribute values.
NOTE: Subsequent calls to the CreateTargetedConfigJob() method after the
first CreateTargetedConfigJob() method results in an error until the first job is
completed.
•The DeletePendingConfiguration() method cancels the pending
configuration (created using the other methods) changes made before the
configuration job is created with
CreateTargetedConfigJob() .
Hardware Inventory Profiles
Table 4-7 lists the classes, functions, operations, and methods for different
hardware on the managed node.
Table 4-7. Hardware Inventory Profiles
Class Name Functions Operations Methods
CPU Profile
DCIM_CPUView Use this class to get the instance
information of all the CPUs and
associated cache available in the system.
Get
Enumerate
NA
Fan Profile
DCIM_FanView Use this class to get the instance
information of all the fans available in
the system.
Get
Enumerate
NA
iDRAC Profile
DCIM_IDRACCard
View
Use this class to get the instance
information of all iDRAC cards
available in the system.‘
Get
Enumerate
NA
Memory Profile
DCIM_MemoryView Use this class to get the instance
information of all memory modules
available in the system.
Get
Enumerate
NA
PCI Profile
RemoteServices1_4.book Page 65 Thursday, October 21, 2010 5:05 PM