User's Manual

Remote Services Operations 25
The described interfaces are specified in the Dell Lifecycle Controller
Management Profile available at
delltechcenter.com/page/DCIM+Extensions+Library. Managed Object
Format (MOF) files for related class and method definitions are also available
in the Dell TechCenter DCIM Extensions Library area. The interfaces are:
ReinitiateDHS(ProvisioningServer, ResetToFactoryDefaults,
PerformAutoDiscovery)
• ProvisioningServer : optional parameter to indicate the Provisioning Server
information. This could be an IP address or a hostname.
•
ResetToFactoryDefaults : required parameter ( TRUE or FALSE ) to
indicate whether the current configuration data needs to be deleted prior
to the next cycle of Auto-Discovery. Only
TRUE will be accepted;
specifying
FALSE will cause an error message indicating the parameter
value is not supported.
TRUE will reset iDRAC to the default values and
then set iDRAC for Auto-Discovery. iDRAC will not be available until the
Auto-Discovery provisioning process is complete and the iDRAC receives
the new credentials.
•
PerformAutoDiscovery: required parameter to indicate when the next
Auto-Discovery cycle should be performed: immediately or at the next
boot. Select
Now to run the Auto-Discovery cycle immediately; select Next
to run it the next time you boot your system.
SetAttribute(ProvisioningServer)
• ProvisioningServer: parameter to indicate the Provisioning Server IP
address/host name.
•
ClearProvisioningServer(): Method to clear the Provisioning Server
property. No input parameters are required.
Managing Certificates
Using Custom Certificates
You can now transfer custom-defined certificates to the iDRAC6, and create a
unique certificate based on the service tag of your system to ensure enhanced
security. You can also have the factory preset the system with the certificate of
your choice using the Custom Factory Install (CFI) process available from
Dell.
RemoteServices1_4.book Page 25 Thursday, October 21, 2010 5:05 PM