User's Manual

98 Troubleshooting and Frequently Asked Questions
Please enter the IPv6
Default Gateway
address
Enter the IPv6 default gateway address.
See "IPv6 Configuration."
Please enter a valid IPv6
DNS Server 1 Address
Enter a valid IPv6 DNS Server1 address.
See "IPv6 Configuration."
Please enter a valid IPv6
DNS Server 2 Address
Enter a valid IPv6 DNS Server2 address.
See "IPv6 Configuration."
Please enter a valid
iDRAC Name of
up to 63 characters
Enter a valid iDRAC name that is less than or
equal to 63 characters.
Please enter a valid
Domain Name of
up to 64 characters
Enter a valid domain name that is less than or
equal to 64 characters.
Please enter a valid Host
Name of up to
62 characters
Enter a valid host name that is less than or
equal to 62 characters.
Please enter a value in
the range of 1 to 4094
Enter a VLAN ID between 1 and 4094. See "Advanced LAN
Configuration."
Please enter a value in
the range of 0 to 7
Enter a VLAN ID priority value between 0 and 7.
See "Advanced LAN Configuration."
iDRAC communication
failure. Please power
down, unplug the
system, wait 5 seconds,
apply power and
power on
Communication with iDRAC has failed. To resolve
this issue:
1 Turn off the system, and then unplug it.
2 Wait 5 seconds.
3 Plug the system back in, and then turn it on.
iDRAC hard failure.
Please power down,
unplug the system, wait
5 seconds, apply power
and power on
Connection with iDRAC has failed. To resolve this issue:
1 Turn off the system, and then unplug it.
2 Wait 5 seconds.
3 Plug the system back in, and then turn it on.
Table A-3. USC - LCE Error Messages and Resolutions (continued)
Error Message Resolution
LC1_3.book Page 98 Monday, December 7, 2009 3:14 PM