User's Manual

72 Remote Service Features
When the server is powered on in the new data center, Auto-Discovery will
run according to the settings, and will download the new user credentials for
the new data center. This interface is supported using WS-MAN only, and the
WS-MAN requests require iDRAC administrator username password
credentials or credentials for an iDRAC user with Execute Server Command
privilege.
The supported WS-MAN interface to reinitiate Auto-Discovery includes
these options:
• Whether the iDRAC will be reset to the factory default configuration
equivalent to a server with being ordered with the Auto-Discover option.
Only
true will be accepted as a value. This is a required input.
• Whether Auto-Discovery will run immediately or at the next iDRAC
powercycle. This is a required input.
• Provisioning Server IP address/hostname. This is optional.
Regardless of the options you specify, the operations below will be performed
by iDRAC as part of the next Auto-Discovery cycle:
• Enable NIC (modular servers)
•Enable IPv4
•DHCP enable
• Disable all administrator accounts
• Disable Active Directory
• Get DNS server address from DHCP
• Get DNS domain name from DHCP
The reinitiate interface and related interfaces are specified in the Dell
Lifecycle Controller Management Profile available at
www.delltechcenter.com/page/DCIM+Extensions+Library. Managed
Object Format (MOF) files for related class and method definitions are also
available in the Dell TechCenter DCIM Extensions Library area. The
interfaces are:
ReinitiateDHS(ProvisioningServer, ResetToFactoryDefaults,
PerformAutoDiscovery)
• ProvisioningServer : optional parameter to indicate the Provisioning Server
information. This could be an IP address or a hostname.
LC1_3.book Page 72 Monday, December 7, 2009 3:14 PM