User's Manual
68 Remote Service Features
support for Auto-Discovery. There are several options for enabling the
network environment to support discovery of the Provisioning Server host by
unprovisioned servers.
One of the following prerequisites must be met for the Auto-Discovery
feature to work properly:
• The DHCP server provides a comma separated list of Provisioning Server
locations using a vendor scope option of class LifecycleController option 1.
These locations can be a hostname or IP address and optionally include a
port. The iDRAC will resolve the hostname of the management console to
an IP address with a DNS lookup.
• The DNS server specifies a service option
_dcimprovsrv._tcp
that
will resolve to an IP address.
• The DNS server specifies an IP address for a server with the known name
DCIMCredentialServer
.
For more information on configuring DHCP and DNS, see Lifecycle
Controller Auto Discovery Network Setup Specification on the Dell Enterprise
Technology Center at www.delltechcenter.com/page/Lifecycle+Controller.
Auto-Discovery Configuration
Before enabling the Auto-Discovery feature, do the following:
1
Press
<Ctrl><e> when prompted within 5 seconds during system
start-up.
The
iDRAC6 Configuration Utility page
displays.
2
Enable
NIC
(for modular system only)
3
Enable
DHCP
.
4
Navigate to
LAN Parameters
.
5
Select
Domain Name
from DHCP.
6
Select
On
.
7
Select
DNS Server
from DHCP.
8
Select
On
.
9
Navigate to
LAN user configuration
.
10
Select
Account Access
.
LC1_3.book Page 68 Monday, December 7, 2009 3:14 PM