User's Manual
USC and USC - LCE 39
Physical Security Configuration
Use the Physical Security Configuration Wizard to control access to the
system control panel.
To launch the Physical Security Configuration Wizard:
1
Click
Hardware Configuration
in the left pane.
2
Click
Configuration Wizards
in the right pane.
3
Click
Physical Security Configuration
to launch the wizard.
4
Set
System Control Panel Access
to one of the following options:
•
Disabled
— You do not have access to information or control,
other than the information displayed by the management controller,
and you cannot specify actions.
•
View Only
— You can move through the data screens to obtain
information using the system control panel interface.
•
View and Modify
— You can obtain information and make changes
using the system control panel interface.
5
Click
Finish
to apply the changes.
To return to the Configuration Wizards screen, click Back. To exit the
wizard, click Cancel.
System Date/Time Configuration
Use the System Date/Time Configuration Wizard to set the date and time
for the system.
To launch the System Date/Time Configuration Wizard:
1
Click
Hardware Configuration
in the left pane.
2
Click
Configuration Wizards
in the right pane.
3
Click
System Date/Time Configuration
to launch the wizard.
The default system date and system time shown in USC - LCE is the date
and time reported by the system BIOS.
4
Modify the
System Date
and
Time
(HH:MM:SS AM/PM)
values,
as required.
5
Click
Finish
to apply the changes.
LC1_3.book Page 39 Monday, December 7, 2009 3:14 PM