User's Manual

36 USC and USC - LCE
Hardware Configuration
USC - LCE provides two different methods for configuring your hardware,
both of which are available from the main Hardware Configuration screen:
• Configuration Wizards guide you through setting up system devices.
The Configuration Wizards include: Physical Security Configuration,
System Date/Time Configuration, iDRAC Configuration,
and RAID Configuration.
•
Advanced Configuration allows you to configure certain devices, such as
Network Interface Controllers (NICs) and the BIOS, using Human
Interface Infrastructure (HII).
• Part Replacement Configuration allows you to automatically update a
new part to the previous part’s firmware level.
Important
• If your system does not have a RAID controller, the OS Deployment
wizard bypasses the RAID configuration option and goes directly to "Select
an Operating System."
• Using USC-LCE, you can navigate to the RAID configuration page from
the
Hardware Configuration Tab-> Configuration Wizards -> RAID
Configuration
.
• For S100 /S300 controllers, virtual disks cannot be created using the
RAID Configuration Wizard in USC - LCE. To create RAID, use the
controller utilities by pressing
<Ctrl><R> when prompted during
system start-up.
• ESX 3.5 and Citrix operating systems do not support series 7 controllers.
• USC has the capacity to display only three storage controllers for RAID
configuration on the console.
• If there are any internal storage controller cards on the system, all other
external cards cannot be configured. If there are no internal cards present,
then external cards can be configured.
Configuring RAID
To configure RAID, follow these steps:
1
Click OS Deployment on the left pane.
LC1_3.book Page 36 Monday, December 7, 2009 3:14 PM