User's Manual

USC and USC - LCE 33
• Proxy Password — The password required for authentication on
the proxy server.
Local Drive
Select Local Drive if you are accessing the updates from a local USB
device or
Dell Server Updates DVD. Select the appropriate volume label
from the
Local Drive drop-down menu.
See "Configuring a Local USB Device" for more information.
2 Click Next .
Select and Apply Updates
The Select Updates screen displays a list of available updates.
1
Select the check box for each update that you want to apply to your
system. The components for which a more current update is available
are selected by default.
If you want to compare the version of the update with the version
currently installed on the system, compare the versions in the
Current and Available fields.
•
Component — Displays the available updates. Select the check box
for each update you want to apply.
•
Current — Displays the component version currently installed
on the system.
•
Available — Displays the version of the available update.
2 Click Apply .
Post-requisites
• The system reboots after the update process is complete. When applying
more than one update, the system may need to reboot between updates. In
this case, the system boots directly into USC - LCE and continues the
update process. No action on your part is required when the system
reboots to complete the update process.
• If the iDRAC firmware update is interrupted for any reason, you may need
to wait for up to 30 minutes before attempting another firmware update.
LC1_3.book Page 33 Monday, December 7, 2009 3:14 PM