User's Manual

30 USC and USC - LCE
Transferring an iDRAC6 Express Card
If the iDRAC6 Express card is transferred from one system to another:
• The rollback feature is unavailable on the new system. See "Rolling Back to
Previous BIOS and Firmware Versions" for more information.
• All pending USC-LCE tasks that are in the process of execution are
deleted on the new system.
• Run
Platform Update wizard to download the appropriate driver pack for
the new system.
The driver pack is deleted if the iDRAC6 Express card is transferred to a
different Dell system. For example, if you move the iDRAC6 Express card
from Dell R410 system to Dell T410 system, the driver pack is deleted.
Removing the iDRAC6 Express Card
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet. To discharge the residual power in
the system, press the power button once.
2 Remove the iDRAC6 Express card from the iDRAC6 Express slot. See the
Hardware Owner’s Manual for your system for more information on
Installing iDRAC6 Express Card.
3 Reconnect the system and peripherals to their power sources.
4 Switch on the system, and then press <F10> to enter USC.
Unified Server Configurator - Lifecycle Controller
Enabled Unique Features
This section contains the features that are only available in USC - LCE.
For information on features common to USC and USC - LCE
see "Common Features."
Updating USC - LCE
You can update to the latest version of USC - LCE using the Platform
Update wizard. It is recommended that you run the Platform Update wizard
on a regular basis to access updates as they become available. See "Updating
the Platform using the Platform Update Wizard" for more information.
LC1_3.book Page 30 Monday, December 7, 2009 3:14 PM