User's Manual

USC and USC - LCE 21
If you use a firewall, you should configure it to allow outgoing FTP traffic
on port 21. The firewall must also be configured to accept incoming FTP
response traffic.
• To download drivers from the online repository (Dell FTP server),
you must enter
ftp.dell.com in the Address field.
or
To download drivers from a locally-configured online repository, in the
Address field you must specify the server host name or the IP address
of the server on which the drivers reside. For information on setting
up local FTP server, see "Configuring a Local FTP Server."
• To download drivers by using a proxy server to access an FTP server,
you must specify:
•
Address — The IP address of the local FTP server or ftp.dell.com .
• User Name — The user name to access the FTP location.
•Password — The password to access this FTP location.
•
Proxy Server — The server host name or the IP address of the
proxy server
•
Proxy Port — The port number of the proxy server
•
Proxy Type — The type of proxy server. HTTP and SOCKS 4
proxy types are supported by USC.
•
Proxy User Name — The user name required for authentication
on the proxy server
•
Proxy Password — The password required for authentication on
the proxy server
2 Select Save Locally to save the drivers locally from the online repository.
From the
Save Locally drop-down menu, select the USB drive to save the
system drivers.
Local Drive
Select Local Drive if the drivers are available from a USB device or
Dell Systems Management Tools and Documentation DVD . For
information on setting up a USB device for updates see "Configuring a
Local USB Device."
LC1_3.book Page 21 Monday, December 7, 2009 3:14 PM