User's Manual

USC and USC - LCE 19
• No Configuration - Select if you do not want to configure your
NIC.
•
DHCP - Select to obtain an IP address from a DHCP server.
•
Static IP - Select to use a static IP address. Specify the following
IP address properties. If you do not have this information, see
your network administrator.
–
IP Address
– Subnet Mask
– Default Gateway
– DNS Address
c Click Finish .
If USC settings are not configured correctly, an error message is displayed.
Deploying the Operating System Using the OS Deployment Wizard
The OS Deployment wizard assists you in installing an operating system on
your system.
USC does not provide a local operating system drivers repository that may be
required for operating system installation. You have to download the
operating system drivers from the Dell FTP website at ftp.dell.com or use a
local source that has drivers on it — for example, Dell Systems Management
Tools and Documentation DVD or a local USB device.
USC - LCE provides a local repository for drivers that may be required for
operating system installation, depending on which operating system you are
installing. The OS Deployment wizard extracts these drivers and copies
them to a staging directory. For supported Microsoft
®
Windows
®
operating systems, these extracted drivers are installed during the
operating system installation. For supported Linux operating systems,
such as Red Hat
®
Enterprise Linux
®
versions 4.7, 4.8, 5.2, and 5.3 and
SUSE
®
Linux Enterprise Server version 10 SP2, you must manually install
the extracted drivers after the operating system installation is completed.
However, starting with Red Hat Enterprise Linux version 5.4, SUSE Linux
Enterprise Server version 10 SP3, 11 and later installs, the extracted drivers
are installed during the operating system installation. See "Deploy the
Operating System" for more information.
LC1_3.book Page 19 Monday, December 7, 2009 3:14 PM