User's Manual

USC and USC - LCE 17
• USC Settings — You do not need to run this wizard again unless you want
to change the language, keyboard, or network settings.
•
Platform Update — Download and apply any updates. Ensure that you
run the Platform Update wizard regularly so that your system is up to
date.
• Hardware Configuration — Run this wizard to configure your system
devices.
•
OS Deployment — Run this wizard to install operating system.
•
Hardware Diagnostics — Ensure that you maintain your system by
running diagnostics on a regular basis.
Accessing Help
Each USC or USC - LCE screen has a Help button in the upper-right corner.
Click Help to display help for the current screen.
Viewing Readme
Click About→ View Readme to display the Readme file.
Disabling USC or USC-LCE
You can disable USC or USC - LCE to prevent your system from entering it
on start-up:
1
Press <Ctrl><e> within 5 seconds when prompted during system
start-up.
The iDRAC6 Configuration Utility page displays.
2 Navigate to System Services .
3 Select Disable System Services .
4 Save your changes and exit the iDRAC6 Configuration Utility page
menu. The system reboots automatically.
To enable USC or USC-LCE, repeat "step 1" and "step 2", and then select
Enable System Services.
Canceling a Request to Enter System Services
If USC or USC - LCE causes the system to repeatedly reboot, you can cancel
a request to enter System Services.
LC1_3.book Page 17 Monday, December 7, 2009 3:14 PM