User's Manual

USC and USC - LCE 15
If the message System Services disabled still displays, then the
product may have been manually disabled. See "Disabling USC or USC-
LCE" for information on how to enable USC or USC - LCE.
•
System Services update required — If the message System Services
update required appears when you boot your system, the
embedded device that stores the product may contain corrupted data.
To resolve the issue, update the product by executing USC or USC - LCE
Dell Update Package (DUP). See the
Dell Update Packages User’s Guide at
support.dell.com/manuals for more information.
If an operating system is not installed on the system or if executing the
DUP does not fix the problem, run USC or USC - LCE repair package.
See "Repairing USC" or "Repairing USC - LCE" for more information.
•
System Services not available — Another process is currently using
iDRAC. It is recommended that you wait for 30 minutes for the current
process to complete; then, reboot your system and try to enter USC or
USC - LCE again.
If you believe the system is in an error condition or if you cannot wait the
recommended 30-minute time period, see "Canceling a Request to Enter
System Services." After rebooting, try to enter USC or USC - LCE again. The
first time you launch USC or USC - LCE, it displays USC Settings wizard
that allows you to configure your preferred language and network settings. See
"Using USC Settings Wizard" for more information.
Using the Wizards
Wizard Description
USC and USC - LCE provide the following wizards based on your system’s
configuration:
• OS Deployment — Enables you to install an operating system. See
"Deploying the Operating System Using the OS Deployment Wizard" for
more information.
•
Hardware Diagnostics — Enables you to perform diagnostics to validate
the memory, I/O devices, CPU, physical disks, and other peripherals.
See "Hardware Diagnostics" for more information.
LC1_3.book Page 15 Monday, December 7, 2009 3:14 PM